Light box
servos, sailwinches and cruise controls
We have tested all these servo motors, winches, etc. They are all optimal for our model boats.servos and sailwinches
 |
Digitale Segelwinde IQ-730 mit 3 Umdrehungen Kompakte, digitale Segelwinde mit 3 Umdrehungen. - hochbelastbaes Getriebe - starkes Haltemoment - spritzwassergeschützt - kurze Stellzeit |
22.00 € * VAT included art.ro.: rcwi730 delivery: on request |
|
 |
Digitale Segelwinde IQ-740 mit 6 Umdrehungen Kompakte, digitale Segelwinde mit 6 Umdrehungen. - hochbelastbares Getriebe - starkes Haltemoment - spritzwassergeschützt - kurze Stellzeit |
22.00 € * VAT included art.ro.: rcwi740 delivery: on request |
|
 |
Digitale Segelwinde IQ-750 mit 12 Umdrehungen Kompakte, digitale Segelwinde mit 12 Umdrehungen. - hochbelastbares Getriebe - starkes Haltemoment - spritzwassergeschützt - kurze Stellzeit |
22.00 € * VAT included art.ro.: rcwi750 delivery: on request |
|
 |
Power Servo The powerful HS-645MG is one of Hitec?s most popular servos. It?s the perfect choice for those larger sport planes or monster trucks and buggies requiring a durable high torque servo. Featuring our unique M/P and metal gear train technology, the HS-645MG offers one of the strongest gear trains available in any servo. Motor Type: 3 Pole Bearing Type: Dual Ball Bearing Speed: 0.24 / 0.20 sec @ 60 deg. English Torque: 106.93 / 133.31 oz.in (4.8v/6v) Size: 1.59" x 0.77" x 1.48" Weight: 1.94oz Metric Torque: 7.7 / 9.6 kg.cm (4.8v/6v) Size: 40.60 x 19.80 x 37.30mm Weight: 55.20g |
44.00 € * VAT included art.ro.: RcSe645 delivery: 10 weekdays |
|
 |
Power-Servo for the hydrojet teering system or the reverse brackets Fits also into the AC-models, the Atlantis and the Victoria. By it`s solid structure and it`s high reliability this servo is a good option to other, more expensive servos of this class. |
19.90 € * VAT included art.ro.: rcse410 delivery: available ex stock |
|
 |
RNG sailwinch 280DL Used as a keelwinch in VO70. This winch has an integrated batterycontrol and low voltage cut off. The way is adjustable from 1 to 6 turns. The automatically cut off when clogging impeded the overcharge of the motor. If the winch do not get a reasonable signal of the receiver, it cuts off. So there is no wince and hum. The automatically braking in idle mode saves current. The drive is ball bearing spindeled. The electrinic is waterproofed capsuled. - 26mm trommel - very strong and fast sailwinch from Australia - 3,8 to 9 volts operating range - optional batterycontrol and low voltage cut off - integrated 5 volt- voltage controller for 1-battery operating range - way adjustable from 1 to 6 turns (depending on model) - automatically cut off when clogging - no hum: puls width modulation drive - programmable for puls width modulation range - delay rate programmable by user - no overtravel when problem with the sender - automatically braking in idle mode - drive is ball bearing spindeled - overcharge protection circuit - instruction manuel If the motor broke down, maybe because of wetnes, we are able to change the single motor in a good value (nearly the tenth part of the original price from the whole winch). THE sailwinch at all! Direct from Australia from Rob and Michele Guyatt!, |
365.00 € * VAT included art.ro.: rmgwinsch delivery: available ex stock |
|
 |
AC-model tuning servo, flat, screwed top down Compatible to all AC-models. This servo is screwed top down and has a height of just 21mm! Through that, more than 2cm of water can enter the boat without actually penetrating the servo. Moreover, this servo has twice the power of the original servo normally installed in AC-models. |
15.90 € * VAT included art.ro.: rcse500 delivery: available ex stock |
|
 |
VO-Racer/Open 60 Standard-Sailservo This Servo is our standard Servo for the VO Racers. Speed: 0.25 / 0.20 sec @ 60 deg. (4.8v/6v) Torque: 10.0 / 13.2 kg.cm in (4.8v/6v) Size: 55.4 x 26.50 x 51.50mm Weight: 110.00g |
18.90 € * VAT included art.ro.: rcse900 delivery: available ex stock |
|
 |
Servo mit viel Power, der Standard-Segelservo für den ACC 110 Die preiswerte Kraftmaschine für die Kreuzmaschine. - für 4,8V bis 6,0V - Stellmoment 240 Ncm, 288 Ncm - Stellzeit 0,24/0,20s - Länge: 63mm, Breite: 32mm, Höhe: 61,6mm - Gewicht: 180g |
51.50 € * VAT included art.ro.: rcse920 delivery: available ex stock |
|
 |
Tuning rudder-servo, AC-model The smallest rudder-servo out there. Ultra-light (8g) and yet powerful enough for the rudder of an AC-model. Easy installation with our AC rudder-servo holder. Just remove the battery/receiver tank, place the battery box and the receiver in small plastic bags and screw the servo holder onto the back fittings of the tank. |
16.50 € * VAT included art.ro.: rcse55 delivery: available ex stock |
|
 |
Tuning-Servo for Sails for VO/Open 60/ACC 110 The HS-765HB sail arm servo has up to 140 degrees of travel and comes with a Heavy Duty 4.5 inch arm. With its dual ball bearing supported output shaft, the HS-765HB will provide years of reliable service for your R/C sailing applications up to 2 meters. |
36.90 € * VAT included art.ro.: rcse765 delivery: available ex stock |
|
 |
Tuning rudder-servo AC The set the standard for affordable performance, offering precision components that have been engineered to provide long lasting trouble free service! Featured in a hundred model aircraft reviews worldwide, the HS-55 is your best choice when it comes to controlling? smaller? electric?s and Park Flyers. We recommend this servor for tuning your AC Model! It´s the perfect rudder servo! Speed: 0.12 / 0.1 sec (4.8v/6v) Torque: 16 / 20 Ncm (4.8v/6v) Size: 27 x 12.7 x 22.4 mm Weight: only 13g Incl. mounting material |
14.90 € * VAT included art.ro.: rcse140 delivery: available ex stock |
|
 |
Rudder-servo for AC model/Open60/VO-Racer/ACC 110 Standard rudder-servo for VO-Racers or Open60. Also usable as a powerful sail- and rudder-servo in your AC model that is worth its money. |
16.90 € * VAT included art.ro.: serrud delivery: available ex stock |
|
 |
Standard rudder-servo (VO/ACC 110) Great value and yet very powerful. Also adequate as an inexpensive, strong sail and rudder-servo for your AC model. Speed: 0.19 / 0.15 sec (4.8v/6v) Torque: 30 / 36 Ncm (4.8v/6v) Size: 41 x 20 x 37mm Weight: only 43g Incl. mounting material |
14.90 € * VAT included art.ro.: rcseru delivery: available ex stock |
|
 |
ACE SAIL WINCH SERVO,WQ2811 This servo is specially design for ETNZ, China Team and Voyager II. That torque is up to 11kg/cm, the speed is at 0.28sec/60 and max. rotation at 2 turns (720 ). Standard quarter size with water proof seal between cases. All plastic gears. Comes with drum and mounting hardware. |
35.90 € * VAT included art.ro.: ttwinde delivery: 3-4 weekdays |
|
 |
tuning-power sailing-servo ACC110 Der Servo mit MegaPower für die America´s Cup Kreuzmaschine., |
45.00 € * VAT included art.ro.: rcse815 delivery: available ex stock |
|
 |
Verlängerungskabel JR, flach, 0,25 mm², PVC, 25 cm 25cm langes, flaches Servoverlängerungskabel für JR Steckersystem. |
4.00 € * VAT included art.ro.: seka25 delivery: available ex stock |
|
| *All our prices include VAT, but are exclusive of shipping and handling cost and C.O.D charge (where required). All rights reserved. Subject to changes and errors. | |||
cruise controls
 |
Reverse-circuit for the Hydrojet-reverse control bracket This unit automatically controls the servo fo the reverse brackets when the control lever of the RC is moved forth or back. A separate operation of the reverse brackets becomes therefore unnecessary. |
89.00 € * VAT included art.ro.: rfklasteu delivery: ca. 2 weekdays |
|
 |
Seaking-90A Brushless ESC for Boats "SeaKing" series is specially designed for boat, so it has the water-cooling system and the whole ESC is waterproof. |
89.00 € * VAT included art.ro.: bvfrbl90a delivery: available ex stock |
|
 |
Spray protected control unit for the 540 and tuning engines with 17-36 Low priced, electronical control unit with reverse for electro cars, trucks and shipmodels. Microprocessor controled, with a high enginestroke rate for basic- and tuning-engines, for example 540 basic engine and tuning engines with 17-36 coils. (For example Power 600/19 and 600/24 or EF76). Gentle to the gear by the special placement of the dynamic brake and the reverse gear. With acrylic coating to seal and protect the device of spraywater. |
66.70 € * VAT included art.ro.: rokra100tam delivery: 3-4 weekdays |
|
| *All our prices include VAT, but are exclusive of shipping and handling cost and C.O.D charge (where required). All rights reserved. Subject to changes and errors. | |||
accessory for servos
 |
|
available on request VAT included art.ro.: 113614 delivery: available ex stock |
|
 |
|
available on request VAT included art.ro.: 113615 delivery: available ex stock |
|
 |
|
available on request VAT included art.ro.: 113623 delivery: available ex stock |
|
 |
1 Kugelpfanne mit 6mm Kugel und Loch für M3 Gewindeschraube |
2.00 € * VAT included art.ro.: 1kpfm6mm delivery: available ex stock |
|
 |
1 Bearing ball socket with brass bearing ball and M3 thread |
1.50 € * VAT included art.ro.: 1kpfm3kav delivery: available ex stock |
|
 |
3x1 Ruderservo Haltebügel Mit dieser Platte wird der Ruderservo in Position gehalten. |
3.00 € * VAT included art.ro.: 3x1sha delivery: available ex stock |
|
 |
Screws 3x10mm DL-22 |
1.20 € * VAT included art.ro.: swdl22 delivery: available ex stock |
|
 |
AC-model tuning rudder-servo holder Just remove the battery/receiver tank, place the battery box and the receiver in small plastic bags and screw the servo holder onto the back fittings of the tank. Made of laser-cut 2mm aluminium used in aircraft construction. Black anodised, 44 x 12 x 20mm. |
18.00 € * VAT included art.ro.: rcruha delivery: available ex stock |
|
 |
AC-model tuning servo holder For the central fitting of a sail servo. Made of laser-cut 2mm aluminium used in aircraft construction. Black anodised, 56 x 65mm |
18.00 € * VAT included art.ro.: rcseha delivery: available ex stock |
|
 |
Pivot point bars for seawind SW-17 |
20.90 € * VAT included art.ro.: sw17ky delivery: available ex stock |
|
 |
Inbus Schraube M3x7,5mm A2 Rostfrei, Edelstahl A2. |
0.80 € * VAT included art.ro.: inbusm3x75 delivery: available ex stock |
|
 |
Printball for bowden cable 1,6 mm Screw made of high-grade steel A2. |
2.90 € * VAT included art.ro.: kpfbowden delivery: available ex stock |
|
 |
Balls for Seawind / VO-Racer OT-32 |
8.90 € * VAT included art.ro.: swkugeln delivery: 3-4 weekdays |
|
 |
Balls with screws for Seawind Z-8007 |
14.90 € * VAT included art.ro.: swkugsch delivery: available ex stock |
|
 |
Ball cups for Seawind / VO-Racer H-6067R 10 Stück Kugelpfanne original Kyosho für Seawind. Typ Z-8034 (H6067R) |
6.70 € * VAT included art.ro.: swkupfa delivery: available ex stock |
|
 |
Lenkhebel / Ruderhorn / Ruderanlenkhebel Maße: Länge 56mm Aufnahme für 4mm Achse Farbe beige |
4.90 € * VAT included art.ro.: rudan delivery: available ex stock |
|
 |
Mini-leverage-connection for 0,5-2mm link bars - Comes with slotted-head screw for fixing the link bar - extreme light and precise Image: Mountingexample for 2 ports at one servo lever Delivery contents: 10 pieces |
5.90 € * VAT included art.ro.: bvgestanschl delivery: available ex stock |
|
 |
Mini-leverage-port for link bar/helm string with 1,5-2mm Ø - Allen-set screw for fixing the link bar - Nylon nuts for attaching the link lever - 10 pieces |
10.40 € * VAT included art.ro.: gestan delivery: available ex stock |
|
 |
O-Ring for Seawind 6mm ORG06 |
8.90 € * VAT included art.ro.: sworing delivery: available ex stock |
|
 |
Ruderanlenkhebel |
available on request VAT included art.ro.: 113601 delivery: available ex stock |
|
 |
rudder drop arm lighter and more solid than serial drop arm |
4.90 € * VAT included art.ro.: ruhoac60 delivery: on request |
|
 |
Rudder linkage (Open60) - 4mm jack - stainless steel |
4.50 € * VAT included art.ro.: ac90rum delivery: available ex stock |
|
 |
Rudder horn for 4mm Rudders (e.g. Seawind / VO-Racer) 94484 Abbildung ähnlich. |
6.20 € * VAT included art.ro.: swruho delivery: available ex stock |
|
 |
Rändelschraube M3 Edelstahl, rostfrei, für Ruderhalterung 3x1 und weitere Modelle Diese Rändelschraube wird vor allem als Ersatz zu Inbusschrauben bei den Ruderanlenkhebeln eingesetzt. Die Schraube ist aus A2 Edelstahl und rostfrei |
4.90 € * VAT included art.ro.: raends3 delivery: available ex stock |
|
 |
Saling servo arm 125mm, alloy Easy to mount sailing servo arm. Easy vertically bending. Due to the drillings the arm is simple to cut. - 125mm sheet radius, 9g weight - a lot of mounting possibilities - airplan aluminium, laser cutted - suits VO60, VO70, ACC110, Seawind |
14.00 € * VAT included art.ro.: arm125 delivery: available ex stock |
|
 |
Saling servo arm 2 x 85mm, alloy Easy to mount sailing servo arm. Easy vertically bending. Due to the drillings the arm is simple to cut. - 125mm sheet radius, 9g weight - a lot of mounting possibilities - airplan aluminium, laser cutted - sVO60, VO70, ACC110, Seawind |
12.00 € * VAT included art.ro.: o60arm delivery: available ex stock |
|
 |
Saling servo arm 85mm, alloy Easy to mount sailing servo arm. Easy vertically bending. Due to the drillings the arm is simple to cut. - 125mm sheet radius, 9g weight - a lot of mounting possibilities - airplan aluminium, laser cutted - suits AC60, R46, Open60, Kat |
9.00 € * VAT included art.ro.: arm85 delivery: available ex stock |
|
 |
Servo-Anlenkhebel, Alu Länge ab Servoachs-Mittelpunkt: 27mm |
1.90 € * VAT included art.ro.: 25011 delivery: available ex stock |
|
 |
Servo-Scheibe |
available on request VAT included art.ro.: 113621 delivery: available ex stock |
|
 |
Servo-Segelarn |
available on request VAT included art.ro.: 113622 delivery: available ex stock |
|
 |
Servoanlenkhebel mit Klemmvorrichtung für Edelstahl-Bautenzug |
available on request VAT included art.ro.: 80762 delivery: available ex stock |
|
 |
Servoarm |
available on request VAT included art.ro.: 113605 delivery: available ex stock |
|
 |
Servoarm |
available on request VAT included art.ro.: 113606 delivery: available ex stock |
|
 |
Servoarm |
available on request VAT included art.ro.: 113607 delivery: available ex stock |
|
 |
Servoarm |
available on request VAT included art.ro.: 113608 delivery: available ex stock |
|
 |
Servoscheibe |
available on request VAT included art.ro.: 113604 delivery: available ex stock |
|
 |
Servoscheibe ø 40mm - 40mm Durchmesser - für Segelservo Vo60 |
1.90 € * VAT included art.ro.: voservs delivery: available ex stock |
|
 |
Trommel für Segelservo |
available on request VAT included art.ro.: 113616 delivery: available ex stock |
|
|
|
Verlängerungskabel JR, flach, 0,25 mm², PVC, 25 cm 25cm langes, flaches Servoverlängerungskabel für JR Steckersystem. |
4.00 € * VAT included art.ro.: seka25 delivery: available ex stock |
|
 |
Y-Kabel 15cm mit JR Stecker/Buchsen - 15cm lang - 2 Buchsen, 1 Stecker |
5.90 € * VAT included art.ro.: rckabel delivery: available ex stock |
|
 |
Y-Kabel 30cm mit JR Stecker/Buchsen - 30cm lang - 2 Buchsen, 1 Stecker |
6.90 € * VAT included art.ro.: rckabel30 delivery: available ex stock |
|
| *All our prices include VAT, but are exclusive of shipping and handling cost and C.O.D charge (where required). All rights reserved. Subject to changes and errors. | |||
