

Regatta tuning
We use our own boats for days on end - on events or exhibitions (e.g. 9 days at the “Boot Düsseldorf”, 8-12 hours a day). The experiences from these long-term runs under the hardest possible conditions are integrated into our tuning products and solutions.Optimised sheet guiding
To prevent the sheets from getting stuck on the battery box, we invented an optimised guidance for both main sheet and foresheet. If you click on the picture on the right-hand side, you will get an enlarged view for printing and rebuilding.AC-safety tuning-package for purchase on ordering a boat
- 1. The servos are unscrewed at the bottom and sprayed with Wet Protect.
- 2. Die Servos werden in kleine Tütchen gepackt, damit Wasser im Schiff nicht gleich eindringen kann.
- 3.Plugs, switches, battery box and receiver are sprayed with Wet Protect.
- 4. The cover of the front hatch is sealed with tape.
- 5. The foam in the back hatch is replaced by sealing tape.
- 6. DThe sheet guidance is optimised to prevent the sheets from getting stuck on the battery box (see above).
- 7. The ends of the sheets are secured with knots to prevent the sheets from slipping into the boat.
- 1. The sail servo is replaced by a plain and more powerful servo that is mounted to the centre of the aluminium subplate.
- 2. The sheet guidance is optimised to make the sheets run smoothly and directly with little friction. To achieve this, a laser-cut sail servo arm with 2 blocks is installed and the sheet is replaced by Spectra.
- 3. The ends of the sheets are secured with knots to prevent the sheets from slipping into the boat.
- 4. The cover of the front hatch is sealed with tape.
- 5. . The cross web in the back hatch is removed
- 6. The black tank for the receiver, switch and transmitter (incl. the switches) is removed.
- 7. The rudder-servo is replaced by a micro servo that is screwed onto the back fittings of the tank with a special aluminium bracket. The rudder is operated via chords that can be adjusted using clamp slides
- 8. The foam in the back hatch is replaced by sealing tape.
- 9. The servos, plugs, battery box and receiver are opened (unscrewed) and sprayed with Wet Protect on the inside.
|
|
10 Quick rings for AC Modell sails Push and click. Easy and fast to handle. You need 9 pcs for, so there is 1 ring left. |
price: 4.50 € * VAT included art.ro.: 10ScRi delivery: sofort, sind auf Lager |
|
|
|
Power Servo The powerful HS-645MG is one of Hitec?s most popular servos. It?s the perfect choice for those larger sport planes or monster trucks and buggies requiring a durable high torque servo. Featuring our unique M/P and metal gear train technology, the HS-645MG offers one of the strongest gear trains available in any servo. Motor Type: 3 Pole Bearing Type: Dual Ball Bearing Speed: 0.24 / 0.20 sec @ 60 deg. English Torque: 106.93 / 133.31 oz.in (4.8v/6v) Size: 1.59" x 0.77" x 1.48" Weight: 1.94oz Metric Torque: 7.7 / 9.6 kg.cm (4.8v/6v) Size: 40.60 x 19.80 x 37.30mm Weight: 55.20g |
price: 44.00 € * VAT included art.ro.: RcSe645 delivery: sofort, ist auf Lager |
|
|
|
AC60 carbon mast for b-rigg with stockmaritime sails Mast of carbon for the b-rigg of AC60. With one spreader pair built of alu and 3 fittings and spectra rope. Including 5 sail-rings and 4 slider. |
price: 69.00 € * VAT included art.ro.: b-rigg delivery: 2 Werktage |
|
|
|
AC-regatta tuning-kit Our regatta experiences of the last two years with AC-models were integrated into this tuning-kit. In windier conditions, the battery box can thus be placed in the back to allow for better gliding of the boat. |
price: 98.00 € * VAT included art.ro.: actuki delivery: sofort, ist auf Lager |
|
|
|
AC safety tuning-service You can order the following tuning-package at our store ? most suitably in combination with a boat. 7 aspects of your boat will be optimised. To prevent the sheets from getting stuck on the battery box, we invented an optimised guidance for both main sheet and foresheet. The tuning service includes: 1. We save the servos in little balloons - no water can come in from the bottom. 2. The receiver will be sprayed with "Wet Protect" liquid 3. We mount sealing tape into the two hatches 4. We modifie the guidance of the sheets with an block 5. We save the ends of the sheets 6. We replace the plastic servo arm and mount an servo arm made from alloy |
price: 38.00 € * VAT included art.ro.: acsic |
|
|
|
AC-model carbon fibre jib pole This jib pole is a lot lighter than the original plastic boom. Through the installed topping lift you can adjust the leech curve of the foresail independently of the backstay tension. Made from carbonfibre tube, sealed at the ends with epoxy. With different holes to fix light-, middle- and heavywind-sails. |
price: 25.00 € * VAT included art.ro.: Ackofo delivery: sofort, sind auf Lager |
|
|
|
AC-regatta tuning-kit incl. installation Our regatta experiences of the last two years with AC-models were integrated into this tuning-kit. In windier conditions, the battery box can thus be placed in the back to allow for better gliding of the boat. |
price: 138.00 € * VAT included art.ro.: actuki1 delivery: sofort, ist auf Lager |
|
|
|
Block, single small and light weight |
price: 3.60 € * VAT included art.ro.: zublo5 delivery: sofort, ist auf Lager |
|
|
|
AC-model tuning servo holder For the central fitting of a sail servo. Made of laser-cut 2mm aluminium used in aircraft construction. Black anodised, 56 x 65mm |
price: 18.00 € * VAT included art.ro.: rcseha delivery: sofort, ist auf Lager |
|
|
|
AC-model tuning sail servo arm Stable, light bracket for approaching the sheets. Made of laser-cut 2mm aluminium used in aircraft construction. - black anodised - width: 98mm |
price: 16.00 € * VAT included art.ro.: rcsearm delivery: sofort, ist auf Lager |
|
|
|
AC-model tuning servo, flat, screwed top down Compatible to all AC-models. This servo is screwed top down and has a height of just 21mm! Through that, more than 2cm of water can enter the boat without actually penetrating the servo. Moreover, this servo has twice the power of the original servo normally installed in AC-models. |
price: 14.90 € * VAT included art.ro.: rcse500 delivery: sofort, ist auf Lager |
|
|
|
AC-Model carbon-fibre mast, undrilled Do oyu have a broken mast? Our High Tech carbon-fibre masts are obvious robust by nearby same weight. Our 85mm Backstayspreader is already stuck, so you can use the AC - Mainsail easily. |
price: 33.00 € * VAT included art.ro.: Ackoma3 delivery: sofort, ist auf Lager |
|
|
|
Tuning rudder-servo AC The set the standard for affordable performance, offering precision components that have been engineered to provide long lasting trouble free service! Featured in a hundred model aircraft reviews worldwide, the HS-55 is your best choice when it comes to controlling? smaller? electric?s and Park Flyers. We recommend this servor for tuning your AC Model! It´s the perfect rudder servo! Speed: 0.12 / 0.1 sec (4.8v/6v) Torque: 16 / 20 Ncm (4.8v/6v) Size: 27 x 12.7 x 22.4 mm Weight: only 13g Incl. mounting material |
price: 14.90 € * VAT included art.ro.: rcse140 delivery: sofort, sind auf Lager |
|
|
|
AC-model tuning rudder-servo holder Just remove the battery/receiver tank, place the battery box and the receiver in small plastic bags and screw the servo holder onto the back fittings of the tank. Made of laser-cut 2mm aluminium used in aircraft construction. Black anodised, 44 x 12 x 20mm. |
price: 18.00 € * VAT included art.ro.: rcruha delivery: sofort, ist auf Lager |
|
|
|
AC-model tuning-servo, flat, wet-protect, screwed top down Compatible to all AC-models. As far as we know, there is no other servo that prevents water from entering as effectively as our tuning-servo. Screwed top down and with a height of just 25mm! Through that, more than 2cm of water can enter the boat without actually penetrating the servo. Moreover, this servo has twice the power of the original servo normally installed in AC-models. - useable for both rudder and sail - operating torque: 44 Ncm, operating time: 0,18 - length: 44mm, width: 23mm, height: 25mm - 35g only! - incl. installation material and numerous accessories - ball bearing - highly resilient gearbox with metal cog wheel - mostly waterproof synthetic casing - high centring precision through 6x potentiometer - high holding torque - JR/hitec plug system |
price: 34.00 € * VAT included art.ro.: rcse77 delivery: sofort, ist auf Lager |
|
|
|
AC60 Tuning-Großbaum Dieser Kohlefaser-Großbaum für die AC60 bzw. Kyosho Fortune 612 ist mit einem Baumniederholer, verstellbarer Segelbefestigung und Schotführung ausgestattet. |
price: 29.00 € * VAT included art.ro.: ac60tungr delivery: sofort, ist auf Lager |
|
|
|
AC-model carbon-mainboom Dieser Tuning-Großbaum aus echter Kohlefaser biegt sich deutlich weniger durch als der Original-Plastik-Großbaum. Das Unterliek ist verstellbar (Unterlieksstrecker eingebaut!) und ein verstellbarer Baumniederholer ist ebenfalls eingebaut. |
price: 35.00 € * VAT included art.ro.: AcKoGr delivery: sofort, ist auf Lager |
|
|
|
AC Modell carbon fibre mast ready to sail Carbon fibre mast, all fittings and stay are included, Long backstayspreader top ia already stuck! Fittings and backstayspreader are made from alloy. Ready to mount! |
price: 59.00 € * VAT included art.ro.: AcKoMa delivery: sofort, ist auf Lager |
|
|
|
boom vang thread ideal for AC60/R46 keen adjustable length: 125mm |
price: 7.90 € * VAT included art.ro.: baumige delivery: sofort, ist auf Lager |
|
|
|
rudder drop arm lighter and more solid than serial drop arm |
price: 4.90 € * VAT included art.ro.: ruhoac60 |
|
|
|
AC60 boom vang - keen adjustable over thread - for self-trimming - stainless steel |
price: 12.00 € * VAT included art.ro.: acnie delivery: sofort, ist auf Lager |
|
|
|
6V Tuning Power Set The perfect set for all who wants more power for their servos without changing them. The most servos and treceivers are working with 6V. This gives your servos a power and speed up to 20% more as with 4,8V. You can use this set for AC60, R46, Open60, VO60, ACC110, Katamaran Gemini... Please check before, if your servos and receivers can be used with 6V batteries. |
price: 34.90 € * VAT included art.ro.: Akku6vpp delivery: sofort, ist auf Lager |
|
|
|
AC60 Power-Charger-Set With this set, you can charge the batteries without replacing them in the boat and in the Radio Control-Unit. |
price: 22.90 € * VAT included art.ro.: ac60lase delivery: sofort, ist auf Lager |
|
|
|
AC 60 tuning keel with 4 big adventages - sanded With this completly new developed AC60 carbon tuning keel you can improve the saling abilities of yor AC60 radically. Smooth surface, sanded wet with 400er paper. We adjusted the fit in the hull. |
price: 49.00 € * VAT included art.ro.: ackiege delivery: sofort, ist auf Lager |
|
|
|
AC 60 tuning keel with 4 big adventages - not sanded With this completly new developed AC60 carbon tuning keel you can improve the saling abilities of yor AC60 radically. Attention: The keel has to be deburred and the fit into the hull has to be carefully adjusted. |
price: 44.00 € * VAT included art.ro.: ackie delivery: sofort, ist auf Lager |
|
|
|
Set of clear hatches with outside switch for AC60 This hatches are lightweigth and clear. You can always see, if you have water in the boat and you must not release them to switch your boat off. A wtertight switch is mounted on the outside of the hatches. You need out article nr. zuma to moiunt the hatches. |
price: 29.00 € * VAT included art.ro.: ac60luk delivery: sofort, sind auf Lager |
|
|
|
AC60 / R46 / TP 52 Tuning Rudder from Carbon, not painted, not smoothed From our new CNC made mould: the AC60 tuning rudder! Fits perfectly to the AC60, R46 and TP52 modelboats. You can use it also for your own ship. If you use it in combination with the AC60 tuning keel on your boat, you will have much more advantages as the sum of the advantages of both parts. |
price: 44.00 € * VAT included art.ro.: ac60rud delivery: sofort, ist auf Lager |
|
|
|
AC60 Express Service 3-5 Buchen Sie unseren Express-Service zu Ihrem individuellen Boot mit Geld-zurück-Garantie! Statt 7-10 Werktage Lieferzeit nach Freigabe des Designs durch Sie, erhalten Sie Ihr individuelles Boot schon nach 3 - 5 Werktagen nach Design Freigabe! |
price: 49.00 € * VAT included art.ro.: ac60express3-5 delivery: sofort |
|
|
|
AC 60 tuning keel with 4 big adventages - painted With this completly new developed AC60 carbon tuning keel you can improve the saling abilities of yor AC60 radically. Sanded an painted black. We adjusted the fit in the hull. |
price: 69.00 € * VAT included art.ro.: ackiela delivery: sofort, ist auf Lager |
|
|
|
AC60/R46 tuning jib boom Tuning jib boom from carbonfiber for AC60 and R46/TP52 boats. This jib boom is equipped with an adjustable balancing weight at the front and a lot of trim options. You can adjust the jib sheet lead, the length of the sheet and the swivel of the boom absolutly easy and precise. The boom gives you a full control about your jib. |
price: 28.00 € * VAT included art.ro.: ac60tunfo delivery: sofort, ist auf Lager |
|
| *All our prices include VAT, but are exclusive of shipping and handling cost and C.O.D charge (where required). All rights reserved. Subject to changes and errors. | |||
thousands of cool parts
We have nearly all original Kyosho sailing parts and our stockmaritime spareparts on stock. You will find our complete assortment with the navigation on the right side (modelboat shop/accessory) oder here >>












